northernhydraulicsamplepumps

Northern Hydraulics products for sale right here. Buy Northen Hydraulics supplies and save money. Check here

The backhoe has a powder-coat finish in bright red and yellow. Features include: heavy-duty, self-contained frame, standard 9 HP Briggs industrial motor, balloon tires, highway-rated tires, support legs, boom arms, specially shaped bucket for increased digging, replaceable teeth, four-spool control valve, and special hydraulic cylinders. Four models are available, two of which can be towed, and two can be attached to three point hitches. Options include a choice of 9 or 12 ft. reach from boom pivot and buckets in a choice of 12 in. width for digging or an 8 in. width for trenching. Model BL70 backhoe, with 90-hp. engine, digs to depths of 14 1/2 ft. and lifts 7,619 lbs. Loader bucket holds 1.3 cu. yds. Cab boasts 360 [degrees] visibility. Choose from 2 backhoe control lever configurations. Spring-applied, pressure-released lock secures boom. Store tools, grease guns, and chains in tool box integrated in left steps. Heavy-duty, single-piece chassis tapers at front for 55 [degrees] steering angle. Integral bucket-mounted flipover pallet forks, which measure 42 ins.

* If the smoke generator suddenly shuts down or great clouds of smoke come out the engine head opening, make the flutter valve your first check. Usually the valve has slipped or the nut holding the valve in place is loose. Reposition the valve and tighten the nut and see if that helps. A good PMCS check is to eyeball the grooves in the head that help hold the valve in place. If they''re worn, you probably need a new head. The valve will not stay in place.* A bad band heater will shut down the control panel when you turn on the panel. Then you can''t; smoke. If you suspect that''s the problem, unplug the band heater. That lets you turn on the control panel and smoke. The generator should still start, although it may have more trouble doing so. Then get the band heater fixed as soon as possible.

Though light in weight, Airbor magnetic drill has a powerful 1.6-hp air motor and 1,600-lb magnetic holding strength. With its extra rack, stroke length is extended to 10 1/4 in. Annular cutter capacity is up to 2 1/16 in. diam. Geared chuck adapter converts the unit to a standard drill press. The Slugger Air Force pneumatic drill, at 24 lbs, 6 1/4" high, is useful for confined area drilling. The drill''s features include a permanent magnet that turns on or off by air power, a cutter capacity of up to 1 1/16" diameter x 3/4" depth and the ability to use ShortSlugger cutters and frame cutters. These cutters'' geometry allows the operator to drill multi-layered truck frames in a single pass.